Drive 14029 - Pump Unit Specifications; Adaptability Classification

Storage 10%~90% non-condensing
Safety Standards
UL, c-UL, CE
* Due to the continual development of the above products, specifications are subject to
change without prior notice.
NOTE:
The above specifications are also applicable to those areas operating with the same
power supply range.
Pump Unit
Series
Function
Specifications
14029
ON/OFF switch
Pressure-selector knob
Normal Pressure LED
Low Pressure LED
Dimension: 33.4 × 12.0 × 24.6 cm
13.1 x 4.7 x 9.7 in
Power: 230V AC/50Hz, 120V AC/60Hz
Pressure: 30~60 mmHg
Cycle time: 12 min/50Hz, 10 min/60Hz
14030
ON/OFF switch
Pressure-selector touch panel
Cycle Time-selector touch panel
Static function
Alarm Reset
Auto Firm
Dimension: 33.4 × 12.0 × 24.6 cm
13.1 x 4.7 x 9.7 in
Power: 230V AC/50Hz, 120V AC/60Hz
Pressure: 10~70 mmHg
Cycle time: 10, 15, 20, 25 min. selectable
Classification of Adaptability
PUMP
MATTRESS
ADAPTABILITY
Stage
14029
4”×18 cells w/low air loss
5”×18 cells w/low air loss
8”×18 cells w/low air loss
14030
10”×20 cells w/low air loss
III