To Next PageTo Next Page
Need help?Do you have a question about the Drive 15300 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Infusion Pump |
| Model | 15300 |
| Infusion Modes | Continuous, Intermittent |
| Volume Range | 0.1 to 9999 mL |
| Power Source | AC power, Internal Battery |
| Battery Life | 8 hours |
| Display | LCD |
| Alarms | Occlusion, Air-in-line, Low battery |
Step-by-step guide for removing bed components from packaging.
Instructions for checking bed components for any shipping damage.
Guidance on how to store the bed if not immediately assembled.
Procedure for joining the head and foot end sections of the bed.
Steps for attaching the headboard and footboard to the bed frame.
Instructions for fitting the bed's casters into the frame.
Guidance on securing frame support assemblies to the bed.
Steps for assembling and installing the bed's drive shaft mechanism.
How to connect the head end motor's cord to the junction box.
Steps to power up and test the bed's operational functions.
Guide for connecting and disconnecting electrical connectors to the junction box.
Introduction to the bed's functions, controls, and emergency crank.
Detailed instructions on using the pendant to adjust head and foot sections.
Instructions for adjusting the overall height of the bed using the pendant.
Procedures for verifying the proper functioning of bed electronics.
Visual inspection of the bed frame, welds, and sleeping surface joints.
Guidelines for cleaning the bed's metal parts and mattress deck.
Recommended lubrication points and bolt tightening checks.
Details on the warranty coverage for different bed components.
