Scout Owner’s Manual www.drivemedical.com
Step 4:
Insert the armrests into the attachment
points in the seat frame so that the
armrests face forward. Secure the
armrests in place with the provided star
knobs at the desired width.
Step 5:
Attach the front basket by aligning the
bracket on the tiller with the mounting
holes on the basket, and then push down
to secure in place.
Step 6:
Unlock the tiller by pulling out on the
tiller lock knob (circled in blue) and
turning to the left.
Step 7:
Fully charge the scooter by inserting the
round charger connector into the battery
charging terminal on the battery pack,
and then insert the 3-pronged plug into a
standard electrical outlet.
To Next Page
Loading...
Need help?
General
