16
OPERATING YOUR STINGRAY
MAIN CIRCUIT BREAKER ( RESET BUTTON )
When the voltage in your scooter’s batteries becomes low or the scooter is heavily strained
because of excessive loads or steep inclines, the main circuit breaker may trip to protect the
motor and electronics from damage.
The location of the circuit breaker is
shown by the arrow on the photograph
(left).
If the circuit breaker is activated simply push the black button back in to reset the circuit
breaker. Please note the normal position of the circuit breaker button as a point of reference
.The button protrudes by 2-3 mm when operating normally, and protrudes by 7-8 mm when
the circuit breaker has activated.
To Next Page
Loading...
