Need help?Do you have a question about the Drive TS19 and is the answer not in the manual?
General| Brand | Drive |
|---|---|
| Model | TS19 |
| Category | Wheelchair |
| Language | English |
Tilt the chair to one side and push down on seat rails to open.
Lift the back support to the upright position; the lock engages automatically.
Align footrest holes with pegs on the frame of the transport chair.
Loosen the bolt on the telescoping tube shaft to adjust footrest length.
Use frame magnets to secure riggings while lifting the chair for storage.
Pull the arm release knob and pull up on the arm to remove it.
Engage dual wheel locks against rear tires before entering or leaving the chair.
Ensure front casters are forward when moving, leaning, or picking objects.
Avoid leaning out without assistance and do not step on foot plates to prevent tipping.
Wipe the frame weekly with a soft cloth; polish metal parts monthly with auto wax.
Clean upholstery with mild soap, rinse, and dry. Replace worn or torn upholstery promptly.
Inspect wheels monthly and correct side play by adjusting the axle lock nut.
Clean solid rubber tires periodically with a damp cloth and replace if cracked or worn.
Drive products are warranted against defects in materials and workmanship for the original purchaser's lifetime.
Warranty excludes misuse, negligence, normal wear, and non-durable components like grips or casters.
To Next Page
