Starting and Driving
1. Ensure the seat is installed correctly and in the
forwards position.
2. Ensure the tiller and seat are adjusted for a
comfortable driving position.
3. Fold down the armrests so you can place your
arms on them.
4. Switch the ignition on. If necessary, switch on the
headlights.
5. Check the battery indicator to see if there is
enough power for your trip. If you have any doubt
about the remaining power, please recharge the
batteries before departure.
6. Set the speed dial to a setting you are safe and
comfortable with.
7. Check the wigwag paddle works correctly.
8. Check the electromagnetic brake works correctly.
9. Ensure it is safe around you before you drive on
the street or road. Engage the low speed setting if
you are driving on the pavement or indoors.
Attention
1. Do not push both sides of
the wigwag paddle
simultaneously. This may
leave you unable to control
your scooter, and could
cause damage or injury.
2. Do not switch the ignition
off while driving as this will
lead to an emergency stop
and possible risk of
damage or injury.
3. Do not set to the highest
speed setting whilst driving
indoors.
4. Do not adjust the speed
setting whilst driving. A
sudden change in speed
may cause danger to
yourself and others, and
may cause damage to your
scooter.
5. Do not place magnetic
devices near the scooters
electrical parts as this
could affect the safe
operation of the scooter.
6. Be careful while driving in
heavy traffic or in crowded
areas.
7. Whilst reversing the
vehicle, beware of people
or objects behind you.
When reversing, the
scooter will sound an
audible warning alarm.
To Next Page
Loading...
