Dru Metro 100XT - Control System; Replacing Receiver Batteries

5
u s e r m a n u a l
English
Caution - Make sure that combustible objects and/or materials such as curtains have a
distance from the appliance and/or the ues of at least 50 cm;
- Do not dry clothes, towels etc. on and/or near the appliance, in order to pre-
vent re;
- Avoid contact with hot parts of the appliance to prevent burns;
- Do not leave children and persons who cannot judge the consequences of
their actions alone with a burning appliance;
- Place the remote control out of reach from children and persons who cannot
properly judge the consequences of their actions.
3.3 Discoloration of walls and ceilings
A brown discoloration is an unpleasant and difficult to solve problem. Brown
discoloration can be caused by burning substances as a result of insufficient
ventilation, smoking, burning candles, oil lamps, etc. Cigarette and cigar smo-
ke contain tar substances that are deposited on colder walls.
These problems can be (partly) solved through a proper ventilation of the
room where the appliance is placed.
4. Control
The appliance is supplied with a remote control. Ignition, controlling the
flame height and switching off are performed by the remote control that ope-
rates a receiver in the control hatch. For some appliances, no control hatch is
supplied. In that case, the receiver is placed under the appliance.
The receiver and remote control are battery powered. The receiver requires 4
penlite (AA type) batteries, the remote control requires a 9V block battery. At
normal use, the batteries will have an average life of one year.
You can also use an optional adapter. Ask your installer for information. In
that case you will need a 230 V connection near your appliance.
4.1 Receiver
The receiver is located in the control hatch (see fig. 1) or is placed under the
appliance.
4.1.1 Replacing batteries
If the receiver’s batteries are almost empty, you will hear 3 short beep sounds,
provided the little motor for controlling the main burner is running (see sec-
tion 4.2.2.1).
To replace the batteries, proceed as follows:
➠
Open the door of the control hatch.
UK