Copyright 2019 Baker Hughes, a GE company, LLC (“BHGE”) — All rights reserved.
137M7122 DPI 705E / DPI 705E IS User Manual–English | 31
8. Press the key to save the changes and move on to the next screen (or press the
key to return to the previous screen without saving).
9. The next screen will show the Date / Month values as “DD.MM” as show below, e.g. “30.01”.
10. To change the date / month value, press the key to increment the current (flashing)
digit, and the key to move to the next digit.
11. Press the key to save the changes and return to the settings menu (or press the
key to return without saving).
12. Press the key to return to the sensor reading screen.
3.2.7 Time
This setting allows to change the system time. The main purpose of the time setting is to allow the
date to rollover at the correct time (i.e. midnight).
To change the time:
1. Ensure sensor reading screen is shown per below.
2. Press the , and keys simultaneously.
3. The display will show “ ” (Advanced) which indicates that the unit is now in the Settings
option.
To Next Page
