2-7-2. How to clean the tubing
- If any foreign material gets on the tubing, use a soft cloth to wipe the tubing with a bit
of water or a neutral detergent.
- Be careful of any liquid doesn’t go into the tubing.
(It may cause the durability of the tubing if water is inside of the tubing, it could also
break and cause a fire if and when water goes into the device from the tubing.)
- Do not spray water directly on the tubing or put the tubing into the water.
- Do not wipe the device with benzene, thinner, alcohol, etc.
2-7-3. How to clean the sleeve
- If any foreign material on the sleeve, use dried cloth or tissue to wipe the sleeve.
- Use little bit of neutral detergent or water on a soft cloth and completely dry the sleeve.
(It may cause decline the durability or modify when the sleeve is wet.)
19
To Next Page
Loading...