Product use and procedure
Use this device only under medical supervision.
Please check the condition of the sleeve and device before use.
It has better effects by using repetitively. Place the device on a hard and flat table, or
hang on the bed and connect to a power outlet.
Ensure the sleeve is the correct size and securely fitted to the patient.
1) Connect the sleeve to the device with the connectable tubing(s).
- Device + Two sleeves
- Device + One sleeve
2) Turn on the power switch at the rear of the device.
3) Operate the device by pressing the START/STOP button for the automatic setting
DVT or enter pressure and interval time manually after initial inflation.
4) The device will operate automatically utilizing the entered settings after the sleeve
self-test operation.
5-1. Before using a device
5-2. Setup and use
5
Two different sleeves
Device Two tubings Two same sleeves
Device One tubing One sleeve
33
To Next Page
Loading...