No Condition Cause Solution
1 No electric power
Power connection
error
Contact your local representative
2
Power on but
not operating
Defect of Inner parts
Check that the plug is correctly inserted
into the outlet
3 Weak air injection
Air tubing damage
Contact the seller if there is a defect in
the inner tubing or sleeve connection
Air tubing socket
damage
Defect of Inner parts
of sleeve
No Condition Cause Solution
1
Power on but not
operating
Power supply error Turn power to the device off and on
2
Noisy during
operating
Setting condition
Check that the device is installed
horizontally
Check that there is nothing laying on
top of the device or underneath
3 No air in the tubing
Tubing connection
error or bent tubing
Check that the tubing is inserted
correctly into the device
Check that the tubing is not bent
4
Air is going through
the tubings in the
wrong order
Connection fault
Check that the plug is correctly
inserted into the outlet
Troubleshooting
6-1. General troubleshooting
6-2. Others related to defect
6
Manufacturer is not responsible for any defect incurred by user neglect.
We can’t be responsible for any defect occurred from user’s careless use, even
though warranty period.
Please contact your dealer or the place where you purchased the product for
repairs or repurchase.
If you can’t solve the problem by this way, please contact our service center.
If you can’t solve the problem by this way, please check the Service Manual
(RND-R-MSM-102-02)
35
To Next Page
Loading...