Chapter 2: Advanced Programming
46
Information regarding the programming of the Command Keys must come from the cen-
tral station to which you will be reporting.
Once you have talked to the central station, program the telephone keys to operate as
they require.
Talk/Listen-in on Phone Lines 1/3 . . . . . . . . . . . . . . . . . . . Section [381], option [5]
Talk/Listen-in on Phone Line 2 . . . . . . . . . . . . . . . . . . . . . Section [381], option [6]
Port Assignments. . . . . . . . . . . . . . . . . . . . . . . . . Sections [802]-[10] to [802]-[13]
Enable Talk/Listen-in on Zones 1-32 . . . . . . . . . . . Sections [802]-[50] to [802]-[53]
Talk/Listen-in Event Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[54]
Audio Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[55]
Telephone Key Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[40]
Telephone Mode Key Programming . . . . . . . . . . . . . . . . . . . . . . Section [802]-[41]
2.3.14Downloading* Downloading allows programming of the entire system via a computer, modem and tele-
phone line. All functions and features, changes and status, such as trouble conditions
and open zones can be viewed or programmed by downloading.
*Downloading cannot occur when system is armed.
NOTE: When power is applied to the system, a 6 hour downloading window
will be enabled. This will allow you to perform downloading without having
to do any keypad programming.
When an event occurs that the system is programmed to communicate to the central sta-
tion, the system will disconnect from the downloading computer and report the event.
This will happen for all events except test transmissions.
If the Answering Machine/Double Call option is enabled (or during the first 6 hours
after power up) the system will answer incoming calls for downloading provided the fol-
lowing conditions occur:
1. The system hears one or two rings, then misses a ring.
2. The system starts the Answering Machine Double Call Timer.
3. If the system hears another ring before the timer expires, it will answer on the first
ring of the second call.
4. The system will immediately go on line and begin the download process unless the
Call Back option is enabled.
5. If Call Back is enabled, the system and computer will both hang up. The system
will then call the Download Computer Telephone Number and wait for the
computer to answer. Once the computer answers, downloading will begin.
If the User Enabled DLS Window option is ON, the user can activate the downloading
feature by entering [✱][6][Master Code][5].
✱✱Except for the first six hours after power up, the system will not answer incoming calls
unless the Answering Machine/Double Call option is enabled, or the Number of
Rings is programmed to be more than [0].
If the User-Initiated Call-Up option is enabled, the user can have the system initiate a
call to the downloading computer by pressing [✱][6][Master Code][6].
The Download Access Code and Panel Identifier Code are for security and proper
identification. Both the system and the computer file should have the same information
programmed before attempting to download.
To Next Page
Loading...
