Section 1.1: Introduction
3
System Supervision Features
The NT9010 continuously monitors a number of possible trouble conditions including:
• AC power failure (system enters “Sleep” mode on loss of AC power for longer than
30 seconds)
• Trouble by zone
• Fire trouble
• Telephone line trouble
• Low battery condition
• Remote sounder supervisory
• Loss of internal clock
• Tamper by zone
• Failure to communicate
• Improper zone placement
False Alarm Prevention Features
• Audible exit delay
• Audible exit fault
• Urgency on entry delay
• Quick exit
• Swinger shutdown
• Recent closing transmission
• Communication delay
• Rotating keypress buffer
Additional Features
• Keypad activated alarm output and communicator test
• Keypad lockout
• 128 event buffer, time and date stamped
• Uploading/downloading capability
1.1.4 Additional
Devices
WLS904-433 Wireless Motion Detector
The wireless motion detector can be used to provide wireless interior protection. The unit
comes with four AAA batteries.
WLS904PL-433 Wireless Motion Detector with Pet Immunity
The wireless motion detector can be used to provide wireless interior protection.
WLS906-433 Wireless Smoke Detector
The wireless smoke detector can be used to provide wireless smoke detection. The unit
comes with six AA batteries.
WLS912-433 Wireless Glassbreak Detector
The wireless glassbreak detector can be used to provide wireless glassbreak detection. The
unit comes with three AA batteries.
To Next Page
Loading...
