DSC Maxsys PC6010 - Backbone Section Originator ID

44
BACKBONE SECTIONBACKBONE SECTION
BACKBONE SECTIONBACKBONE SECTION
BACKBONE SECTION
ORIGINATOR IDORIGINATOR ID
ORIGINATOR IDORIGINATOR ID
ORIGINATOR ID
Backbone Section
ORIGINATOR IDORIGINATOR ID
ORIGINATOR IDORIGINATOR ID
ORIGINATOR ID
(0)(0)
(0)(0)
(0)
This section contains the programming for the backbone modules.
If you will be installing an PC6442 or PC6443 module, program 01 for the Originator ID code. The system
sends this code with every communication over the backbone. You must program 01 to be able to enroll
backbone modules.