To Next PageTo Next Page
Need help?Do you have a question about the DSC PC1555 CP-01 and is the answer not in the manual?
General| Partitions | 1 |
|---|---|
| Keypads Supported | Up to 8 |
| Weight | 3.5 lbs |
| PGM Outputs | 2 |
| Communication | PSTN |
| Communications | DSC Contact ID, 4+2 Express, SIA |
| Power Supply | 16.5V AC/40VA |
| Battery Backup | 12VDC, 4AH |
| Zones | 8 |
Provides a step-by-step guide for installing the PC1555 CP-01 control panel and its components.
Explains the function of each terminal on the PC1555 CP-01 control panel for proper wiring.
Details various methods for wiring zones, including NC, EOL, and DEOL loop configurations.
Describes the procedure for entering installer programming mode, including keypad specific steps.
Explains how to enter decimal data for programming sections and exit options.
Covers the procedures for arming and disarming the system using access codes and different arming modes.
Details various system commands accessible via the [*] key, such as zone bypassing and trouble display.
Explains the operation of dedicated function keys on the keypad for common system tasks.
Covers fundamental zone definitions, system times, and special access codes for system setup.
Options related to remote downloading, call-back, and DLS window management for system updates.
Includes installer-specific functions like walk tests, module supervision, and factory default procedures.
Discusses how improper installation can compromise system effectiveness and security.
