DSC PC 1864 User Manual

DSC Power Series PC 1864 Quick Guide
https://alpha.adt.com/help/21.html[11/8/2018 11:28:07 PM]
DSC Power Series PC 1864 Quick Guide
For a detailed review of the entire system, please refer to the DSC Power Series manual.
There are two variations of the keypad for this system. This quick guide contains information for both,
indicated by the use of ‘OR’ in the instructions.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
Select

DSC PC 1864 Specifications

General

Brand	DSC
Model	PC 1864
Category	Control Panel
Language	English

Summary

Arm and Disarm the System

Arming the System

Instructions for arming the system in AWAY, STAY, and NIGHT modes, including Quick Arm.

Disarming the System

Instructions on how to disarm the system using a security code.

Battery

Bypass Protected Areas

Change Date and Time

Chimes and Beeps

Reset

Security Codes

Programming New User Codes

Steps to program new user access codes and define their access levels.

Erasing Access Codes

Procedure to erase an existing access code from the system.

User Levels Explained

Description of different user levels (Master, User, Supervisor, Duress, etc.) and their functions.

Trouble Conditions

Volume