DSC Power Series PC 1864 Quick Guide
https://alpha.adt.com/help/21.html[11/8/2018 11:28:07 PM]
DSC Power Series PC 1864 Quick Guide
For a detailed review of the entire system, please refer to the DSC Power Series manual.
There are two variations of the keypad for this system. This quick guide contains information for both,
indicated by the use of ‘OR’ in the instructions.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
Select
To Next Page
Need help?
General
