DSC PC2000

Details the main components of the security system, including the control panel and keypads.

Provides essential advice on manual usage, system testing, and handling trouble conditions.

A form for documenting zone protection areas, zone types, master code, and programmed codes.

Instructions for arming the system, including pre-arm checks and code entry.

Procedure for disarming the system, including entry delay and alarm memory indication.

Method to temporarily disable zones, allowing system arming with open or faulty zones.

Explains how keypad 'TROUBLE' lights and zone lights indicate system faults.

Guide on how to view which zones triggered an alarm after the system is re-armed.

Instructions for programming or changing user security codes using the master code.

Details the function of various keypad lights (READY, ARMED, ZONE, SHUNT, TROUBLE, PROGRAM).

Instructions for performing a local test of the keypad, sounder, and sirens.

Steps for adding, changing, or deleting up to eight user security codes.

Procedure to program the system for automatic arming at a specific time each day.

Enables programming of other devices like door strikes or lights via keypad command.

Sets the duration for entry delay and exit delay in seconds (01-99).

Configures the duration, in minutes, the siren will sound before automatically shutting off.

Enables/disables quick arming via [*][0] and automatic daily arming.

Allows the keypad to emit a tone when specific doors/windows are opened or closed while disarmed.

Describes programming for periodic test code transmissions to the monitoring station.

Explains the duress code feature for silent disarming and signaling the monitoring station.

Details two zones activated from the keypad: one for audible alarm, one for silent alarm.

Details the twelve-month warranty, exclusions, and limitations on liability.

Information regarding radio frequency energy, potential interference, and corrective measures.