For a detailed review of the entire system, please view the DSC Power Series system manual.
This manual includes instruction variations for LED and LCD keypads. Any instructional differences are
indicated by the use of ‘OR’.
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button OR enter your [security code] + [*] + [0] to Quick Arm.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
button OR enter your [security code] and do not leave the premises.
To arm all in NIGHT mode, where both the interior and exterior are armed, press [*] + [1] after first
arming in STAY mode.
Disarm:
To disarm, enter your [security code] .
Quick Guide: DSC Power Series PC1616
To Next Page
Need help?
General
