Chapter 9
9.2 Fire and CO Zone Types
l If a Fire zone generates an alarm only the partition the fire zone is assigned to will go into alarm.
Other partitions retain their current state.
l If the [F] key on a global keypad is used to generate an alarm all enabled partitions will go into
alarm.
l One or more fire keypads may be located on any partition.
l On alarm, the fire auto-scroll display appears on all partition keypads and on all global keypads.
Fire alarm silence and fire system reset may be done directly on any partition keypad. To silence
a fire or CO alarm from a global keypad requires that the global keypad be loaned to one of the
partitions.
- 37 -
To Next Page
Loading...
