DSC neo HS2128 - 1.0 Quick Reference; Status Lights; Common Functions

Chapter 1
1.0 Quick Reference
The PowerSeries Neo Alarm System uses shortcut keys to access features on all models of keypads.
When using an LCD keypad, the PowerSeries Neo Alarm System uses a menu based navigation system.
The scroll keys can be used to navigate through the list of options contained within the current menu. For
more information see: 2.0 “Understanding your Keypad”. Look up detailed information on any of the lis-
ted actions using the accompanying Section number.
NOTE: Some features must be enabled by installer.
NOTE: Bypass Groups are not permitted in UL listed installations.
Status Lights
Function
Keys
Emergency
Keys
Ready - Indicates system normal. Must be on to arm system. All zones must
be secured or bypassed and the system disarmed for this light to activate.
Stay Arm
Fire
Armed - Indicates system is armed . If the Ready light and the Armed light are
both on, an Exit Delay is in progress.
Away
Arm
Medical
Trouble - On indicates a system malfunction or tamper. Flashing indicates that
the keypad has a low battery condition. Follow the instructions displayed or
enter [*][2] to view trouble. Correcting the trouble turns off the indicator.
Chime
Panic
AC Power - Indicates AC Power is present. The AC Power light will turn off
when AC is absent.
Reset
Sensors
Quick
Exit

Action Press Section
Away Arm
for 2 seconds + [Access Code*]
3.1.2
Stay Arm
for 2 seconds + [Access Code*]
3.2
Night Arm When armed in stay mode [*][1] + [Access Code*] 3.3
Disarm [Access Code] 3.1
No-Entry Arm-
ing
[*][9] + [Access Code*] 3.4
Quick Arm
/Quick Exit
[*][0] 3.5
Abort Arming
Sequence
[Access Code]
Bypassing - All bypass commands begin with [*][1] + [Access Code*]
Bypass Indi-
vidual Zones
[3 Digit Zone #] 3.7.1
Bypass All
Open Zones
[9][9][8] 3.7.1
Recall Last
Bypass
[9][9][9] 3.7.1
Clear Bypass [0][0][0] OR [Scroll] Bypass Options + [*] + [Scroll] Clear Bypasses + [*] 3.7.1
Program
Bypass Group
[3 digit zone #s] + [9][9][5] OR [3 digit zone #s] + [Scroll] Bypass Options
+ [*] + [Scroll] Prg Bypass Group + [*]
3.8
Load Bypass
Group
[9][9][1] OR [Scroll] Bypass Options + [*] + [Scroll] Bypass Group + [*] 3.8
Common Functions
Set Time and
Date
[*][6] [Master Code] + [0][1] 8.2
- 4 -