20
3.7 Features Available for the LCD5500Z
These features are only available for LCD5500Z keypads with zone inputs:
Automatic Scrolling of Alarms in Memory
The LCD5500Z keypad allows automatic scrolling through alarms in memory while the keypad is idle.
This feature, if enabled, will override the clock display. This option can be programmed in LCD
programming section [66], option [4].
24 Hour Time Display Option
The LCD5500Z can be programmed to display time using a 24- hour clock, instead of a 12-hour, a.m./
p.m. clock. This option can be programmed in LCD programming section [66], option [3].
Keypad Zones
See section 2.10 “Keypad Zones”.
Viewing Troubles While Armed
See section 3.4 “[✱][2] Trouble Display” for information on how to view troubles.
Backlighting Boost (available for all zone input keypads)
The LCD5500Z and PC55XXZ zone input keypads will provide extra number pad lighting when any key is
pressed. The backlighting boost will last for an additional 30 seconds after the last keypress.
Prompts for the following features are only supported by LCD5500(Z) v2.X:
• Downlook Support (DLM-4L/PC5108L): Active Camera Monitor Selection, Remote Trigger
• Auto Arm features: Late to Close, Auto Arm Postpone/Cancel, Auto Arm by day
• Bypass groups
K E Y P A D C O M M A N D S
To Next Page
Loading...
Need help?
General
