6
3.4 Identified Wireless Keys
Reporting by the system of openings/closings by individual wireless keys and
command output [✱][7] activation by wireless key buttons may be supported on
certain control panels. To do this, the system will reserve access codes 17 – 32 for
wireless keys 01-16 respectively. You must program one access code for each
wireless key (using [✱][5] access code programming) for this feature to work
correctly.
NOTE: Program these access codes on the system
after
you have connected the
PC5132-433 to the Keybus (see section 2.4).
Refer to your system Installation Manual for information on access code program-
ming.
Opening/Closing By Wireless Key Reporting
NOTE: The Identified Wireless Key Closing option is only available with the PC5020 or
PC501X, PC1555, PC580 v2.0 and higher by turning section [015] option 4 off.
To enable the reporting of openings and closings
by identified wireless keys:
• Make sure the control panel is v2.0 or higher
• Program a valid access code for each key
• Program a closing and opening reporting code for each key’s access code
• Turn off the Quick Arm option in section [015] option [4] of the control panel
programming
To ensure that an
unidentified wireless key
cannot disarm the system, turn off section
[017], option [1] (in the control panel programming). This option is available in control
panels with software version 2.1 or higher.
Command Output Activation
NOTE: The Identified Wireless Key Command Output Activation feature is only avail-
able with the PC5020, PC501X, PC1555 and PC580 v2.0 and higher.
To enable command output activation by wireless keys, ensure that:
• The control panel is v2.0 or higher
• Program a valid access code for each key
• Enable the PGM output attribute Requires Access Code for each PGM
output programmed as [✱][7][1-4] in sections [141] to [154] ([501] to [514]
for the PC5020).
Now that you have enrolled all the wireless devices, you will need to program the
system to work properly with the devices. See section 4 for more information.
W I R E L E S S D E V I C E S
To Next Page
Loading...
