12
5.2 Mount the PC5132-433 and Wireless Devices
When you have tested reception of the PC5132-433 with all the wireless devices (see
section 5.1) and you have a good mounting location, mount the PC5132:
1. Pull the Keybus wires through the hole at the bottom of the cabinet.
2. Mount the cabinet securely to the wall.
Mount the Devices
If you have conducted the placement test described in section 5.1 and got 3 ‘good’
results in a row for each device, you can mount the wireless devices. See the
Installation Sheet
for each device for mounting instructions.
Now that your PC5132-433 and wireless devices are mounted and working properly,
read section 6 for information on potential wireless trouble conditions, RF jamming
signals, and battery replacement.
To Next Page
Loading...
