DSC PC5516 User Manual

1
System Introduction
S E C T I O N 1
1.1 Specifications
Control Panel Specifications
Flexible Zone Configuration:
• 8 Fully Programmable Zones
• 38 Access Codes: 32 User, 1 System Master, 2 Partition Master, 2 Duress and 1 maintenance
• Expandable to 32 Zones
• Keypads with zone inputs available (PC/KP5508Z, PC/KP5516Z, PC/KP5532Z, LCD/KPL5500Z)
• Hardwired expansion available using the PC5108 Eight Zone Expansion module, the PC5700 Fire
module, or the PC5720 Fire and DVACS module.
• Wireless expansion available using the PC5132 Wireless Zone Expansion module (up to 32 wireless
zones, 900MHz, True Spread Spectrum Technology, Fully Supervised)
• Normally Closed, Single EOL, or Double EOL zone supervision
• 2-Wire Smoke Input (via PGM2 input)
• 27 Zone Types, 8 Programmable Zone Options
• 2 Partitions
Audible Alarm Output:
• Supervised Bell Output (current limited at 3 amps), 12 V
DC
• Steady or Pulsed Output
EEPROM Memory:
• Will not lose programming or system status on complete AC and Battery failure
Programmable Outputs:
• Up to 14 Programmable Voltage Outputs, 23 programmable options
• One High Current (300 mA) PGM output with 2 wire smoke detector capability on main panel
• Maximum Loop Current is 1.5 mA when the 2-wire smoke detector configuration is used
• One Low Current (50 mA) PGM output on main panel
• Eight Additional Low Current (50 mA) PGM outputs available using the PC5208 module
• Four High Current (1 Amp) PGM outputs Available Using the PC5204 module
• 1 PC5204 Output Fully Supervised for Siren Output
Powerful 1.5 Amp Regulated Power Supply:
• 500 mA Auxiliary Supply, 12 V
DC
• Positive Temperature Coefficient (PTC) components replace fuses
• Supervision for loss of AC Power, Low Battery
• Internal Clock Locked to AC Power Frequency
Power Requirements:
• Transformer = 16.5 VAC, 40VA
• Battery = 12 volt 4 Ah minimum rechargeable sealed lead acid
Remote Keypad Specifications:
• 8 Different Keypads Available:
- PC5508(Z)/KP5508(Z) 8 Zone LED Keypad - PC5532(Z)/KP5532(Z) 32 Zone LED Keypad
- PC5516(Z)/KP5516(Z) 16 Zone LED Keypad - LCD5500(Z)/KPL5500(Z) Alphanumeric Keypad
• Each Keypad has 5 Fully Programmable Function Keys • Connect up to 8 Keypads
• Four Wire (Quad) Connection to Keybus • Built in Piezoelectric Buzzer
Digital Communicator Specifications:
• Supports all Major Formats including SIA and Contact ID • Event Initiated Personal Paging
• 3 Programmable Phone Numbers • 2 Account numbers
• Supports LINKS1000 Cellular Communication • DTMF and Pulse Dialing
• DPDT Line Seizure • Anti-jam Feature
• Split Reporting of Selected Transmissions to Each Telephone Number
System Supervision Features
The PC5010 continuously monitors a number of possible trouble conditions including:
• AC Power Failure • Trouble by Zone • Fire Trouble
• Telephone Line Trouble • Low Battery Condition • Bell Output Trouble
• Loss of Internal Clock • AUX Power Supply Fault • Tamper by Zone
• Failure to Communicate • Module Fault (Supervisory or Tamper)

DSC PC5516 Specifications

General

Zones	16
Keypads	Up to 8
Frequency	50/60 Hz
Battery Backup	7 Ah
Operating Temperature	32°F to 120°F (0°C to 49°C)
PGM Outputs	2
Dimensions	10 in × 7.5 in × 3 in
Humidity	93% relative humidity, non-condensing

Summary

Specifications

Control Panel Specifications

Details the core features and capabilities of the control panel.

Flexible Zone Configuration

Defines the system's zone capacity, types, and expansion options.

Programmable Outputs

Explains the system's outputs and their programmable functions.

System Supervision Features

Additional Devices

PC5132 Wireless Receiver Module

Getting Started

Installation Steps

A step-by-step guide for installing the control panel and system components.

Terminal Descriptions

Explains the purpose and connections for each terminal on the control panel.

Keybus Operation and Wiring

Details the keybus communication system and wiring guidelines.

Assigning Zones to Zone Expanders

Keypad Assignment

Assigning keypads to specific slots and partitions for supervision.

Enable Supervision

Activating system supervision to detect module removal or faults.

Zone Wiring

Methods for wiring detection devices to zones with various supervision types.

Keypad Commands

Access Codes

Details the types and management of access codes for the system.

Arming/Disarming

Procedures for arming and disarming the security system.

[*] Commands

Accessing advanced system functions via keypad commands.

Zone Bypass/Reactivate Stay/Away Zones

How to bypass or reactivate specific zones.

Trouble Display

Viewing and identifying system trouble conditions.

Programming Access Codes

Step-by-step instructions for programming user access codes.

User Functions

Command Output Functions

Activating programmable outputs (PGMs) via keypad commands.

Function Keys

Using dedicated keys for common system operations.

Function Key Options

How to Program

How to Enter Installer Programming

Procedure to access the installer programming mode.

Programming Decimal Data

Programming HEX Data

Program Descriptions

Zone Definitions

Defines the operational behavior for each system zone.

Zone Attributes

Customizes zone behavior like audible/silent, bypass, and force arm.

Communicator - Dialing

Configuration settings for outgoing calls to central station.

Communicator - Phone Numbers

Programming primary, secondary, and backup phone numbers.

Communicator - Account Numbers

Communicator - Reporting Formats

Specifies how event data is formatted for transmission.

Communicator Reporting Codes

Defines the reporting codes sent for various system events.

Test Transmissions

Downloading

Methods for remote programming and system management.

Partitions/Zone Assignment

Dividing the system into independent operational partitions.

PGM Outputs

Configuration and control of programmable output modules.

PGM Output Options

Selecting the function for each programmable output.

PGM Output Attributes

Telephone Line Monitor (TLM)

Siren

Test Transmission

Fire, Auxiliary, Panic Keys

Entry/Exit Delay Options

Event Buffer

Keypad Lockout

Arming/Disarming Options

LINKS1000 Cellular Communicator

Configuration and usage of the cellular communicator.

Wireless Expansion

Supervision of Wireless Zones

Escort5580 Module

Default (Factory)

Walk Test (Installer)

Appendix A

Contact ID

Reference guide for Contact ID reporting codes and event identifiers.

Appendix B

SIA Format

Reference guide for SIA communication format and identifiers.

Installation Manual

PC5010

Specific information and version details for the PC5010 control panel.