Chapter 6.0 Trouble Conditions
6.0 Trouble Conditions
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this hap-
pens, your Alarm Controller identifies the problem and displays an error message. Refer to the
provided list when you see an error message on the display. If additional help is required, contact
your distributor for service.
Note: This equipment contains no user-serviceable parts, except for the keypad batteries. Dispose
of used batteries as per local rules and regulations.
When the system detects a trouble condition the following occurs:
l The Trouble indicator turns on.
l The keypad beeps once every 10 seconds.
l Press the [*] key to silence the keypad beeps.
Press [*][2] to examine troubles. When viewing troubles, the trouble indicator flashes to identify
the level of trouble being viewed. One flash = level 1, two flashes = level 2 etc.
Setting of your system may be impeded by a trouble. To override this condition, enter [*2], scroll to
Acknowledge All Troubles and press [*] or enter 999.
Trouble
Condition
Trouble
#
Level 1
Description
Trouble
Types
Trouble
#
Level 2
Trouble
Notification
Level 3
Note: Trouble #s are used to identify the number to view the trouble and depending on the keypad
type being used, identifies which LED or digit illuminates to display the trouble. Similarly,
Trouble Notification identifies the range that may be displayed on the keypad. When exploring the
trouble levels, the Trouble indicator will flash to identify which level you are currently viewing.
Service
Required
01 Assorted Trouble types.
Time and Date troubles can
be resolved by resetting the
Time/Date. To set Time/Date
press [*][6][0][1]. For all
other troubles call for ser-
vice.
Bell Circuit 01
RF Jam 02
Auxiliary
Supply
03
Loss of clock 04
Output 1
Fault
05
- 16 -
To Next Page
Loading...
Need help?
General
