DSC SCW9045-433 v1.0 - Troubles, Openings;Closings, and DLS Settings (Digit 3)

Section 3: Template Programming
7
• Digit 3 selects 1 of the 8 following options
• Common Group - Sets all Reporting Codes to Automatic
• Selected Troubles - Enables the following Troubles
• Openings & Closings - Sets Residential Dial Reporting Codes for all openings and closings
Option
Common
Group
Selected
Troubles
Openings/
Closings
Zone
Restorals
DLS/Installer
Lead In/Out
1 
2   
3 
4    
5  
6  
7   
8 
 indicates included, Blank indicates default setting,  indicates disabled
Description Phone 1 Phone 2 Sections
Set all Reporting Codes to automatic [320] - [348] FF
Alarm/Restore call directions enabled

[351][1] ON, [2] OFF
Tamper/Restore Call directions disabled

[359][1] OFF, [2] OFF
Opening/Closing Call directions disabled

[367][1] OFF, [2] OFF
Maintenance Call Directions enabled

[375][1] ON, [2] OFF
Test Transmission Call directions disabled

[376][1] OFF, [2] OFF
Trouble [345] Alarms [346] Restoral
Battery FF FF
AC Failure 00 00
Fire Trouble FF FF
Aux PS FF FF
TLM XX 00
General System 00 00
FF = Communicate in automatic format, 00 = Disabled, XX = Not Transmitted
Users CLOSINGS, Residential Dial Reporting codes Section
1-8 5152535455565758[339]
9-16 61 62 63 64 65 66 67 68 [339]
40 99 FF FF FF FF XX XX XX [341]