PANELS, KEYPADS & MODULES
Contact your DSC distributor
www.dsc.com
1-888-888-7838
+1-905-760-3000
Quick-Start Installation Guide
1. Remove Face Plate from ALEXOR Wireless Panel
To remove the face plate, insert a small screwdriver into the 2 slots located at the
bottom.
2. Run the Power
Run AC wire and phone line through wire channel, into ALEXOR casing and wire into
terminal blocks as indicated.
3. Attach the Panel Cabinet
Mark mounting holes on wall and mount with screws provided.
4. Connect the Battery and Power It Up
Connect battery and connect face to back plate.
Provide AC to ALEXOR by plugging in the transformer
Wireless Panel & WT5500 Keypad
Just a few short steps will help you
simplify your installation process & get
you on your way to your next install
To Next Page
Need help?
General
