DSC WT5500 User Manual

English
WARNING: Please refer to the System Installation Manual for information on limitations regarding product use and function, and information on the limitations as to liability of the manufacturer.
NOTE: These instructions are to be used in conjunction with the appropriate Control Panel Installation Manual, with which this equipment is intended to be used.
WT5500
Installation Instructions
1
23
4
5
6
7
8
0
#
9
*
Enter Code to
Arm System
<>
29007335R001

DSC WT5500 Specifications

General

Display	LCD
Wireless Frequency	345 MHz
Operating Temperature	0°C to +49°C (32°F to 120°F)
Material	Plastic
Keypad Type	Touchpad
Power Source	AC power with battery backup
Humidity	5% to 95% (non-condensing)
Mounting	Wall-mounted

Summary

WT5500 Installation Instructions

Mounting and Powering

Guides for physically installing the keypad and connecting power sources.

Keypad Programming Introduction

Introduces keypad programming and broadcasting LCD labels.

Keypad Configuration and Programming

Language and Enrollment

Programming Zone Labels

How to assign custom names to zones for better identification.

Display and Buzzer Settings

Keypad Enrollment Details

Specifics on partition and function key assignment during enrollment.

Keypad Functionality and Options

Keypad Function Key Assignment

Programming Labels and Messages

Keypad Option Settings

Configuration of first, second, and third keypad options for system behavior.

System Labels, Defaults, and Indicators

Command Output Labels

Keypad LED Symbol Guide