DStv 5-2 - DStv Switch Overview and Troubleshooting

• The DStv Switch (5-2) has:
- Four inputs (labelled H/L, V/L, H/H, V/H);
- Four normal multiswitch outputs (labelled 1 to 4); and
- Two Explora outputs (labelled A and B).
• Each multiswitch output (labelled 1 to 4) outputs a signal equivalent to a
normal multiswitch output or a single LNB output.
• The DStv Switch comes with 3 cables. You may need additional cabling,
depending on your set up.
1
DStv Switch - User Guide
Your DStv Switch (5-2)
1 2 3 4
Inputs
H/L V/L H/H V/H
A
B
Multiswitch outputs
Explora outputs
DStv Switch (5-2)