EasyManuals Logo

DT SWISS RATCHET EXP User Manual

DT SWISS RATCHET EXP
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
2.14 MOUNTING THE FREEWHEEL SYSTEM
DANGER
RISK OF INJURY DUE TO LIMITED FREEWHEEL FUNCTION DUE TO INCORRECT
LUBRICATION!
If too much grease is applied on the ratchets, the actuation of the ratchets may not work.
The
ratchets may slip during pedaling.
Only apply a thin, even layer of grease.
Only use the red DT Swiss special grease.
1. Apply DT Swiss special grease evenly to the
outer and the inner toothing of the ratchets
using a ne brush.
For an optimal functionality of the
freewheel system, a thin layer of grease
is sufcient.
2. Put the spacer onto the axle.

Other manuals for DT SWISS RATCHET EXP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DT SWISS RATCHET EXP and is the answer not in the manual?

DT SWISS RATCHET EXP Specifications

General IconGeneral
BrandDT SWISS
ModelRATCHET EXP
CategorySwitch
LanguageEnglish