DT SWISS RATCHET EXP User Manual

Ratchet EXP - Technical Manual 9
4. Remove the spring, the ratchet and the
washer from the freewheel body.
2.5 DISMOUNTING THE BALL BEARING ON THE NON DRIVE SIDE
1. Tap out the ball bearing on the non drive
side with a plastic hammer with slight
hammer strokes onto the axle.
2. Remove the ball bearing from the axle.

DT SWISS RATCHET EXP Specifications

General

Brand	DT SWISS
Model	RATCHET EXP
Category	Switch
Language	English