DTC SOLO7 - Page 59

Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 7-53
Command Command Name Type R/W Scope Options
ppmt Manual PMT PID integer Config
ppv1 Manual video PID integer Config
ppva Manual ANC 1 PID integer Config
pdmt Delay PMT update integer Config s
Group: Unit
Command Command Name Type R/W Scope Options
gdef Restore defaults intList Write
Only
Global 0 = No
1 = Yes
gfpg FPGA version number string Read
Only
Global String length = 8
glod Current config intList Memory 0 = Current
1-16 = 1-16
gser Electronic serial number string Read
Only
Global String length = 8
gtmp Board temperature integer Read
Only
Global C
gvba Battery voltage double Read
Only
Global V
gver Software version number string Read
Only
Global String length = 10
gdlc Initiate code download integer
Write
Only
Global
gdsl Disable status LEDs intList Global
0 = No
1 = Yes
gdtc
Disable temperature
compensation
intList Global
0 = No
1 = Yes
glma License mask hexString
Read
Only
Global
gmax Number of configurations integer Global
gnet Network name string Global String length = 12
grst Remote reset integer Write
Only
Global
gsle Operational state intList Global 0 = Active
1 = Standby
2 = Sleep