RPT-5 Tester – User manual 10
First connection:
• Select a Bluetooth device by selecting Settings → Bluetooth.
• When pairing devices, enter the PIN number 7785 (shown in the device menu).
All program data is saved in the device's main memory in the RPT5_DATA folder.
To back up the database, you must make a copy of this folder. To transfer data to
another device, all you need to do is move the contents of the mentioned directory.
6. Troubleshooting
Problem Solution
The device does not turn on. After
connecting to the charger, no
indicator lights up.
Check if the charger is operational.
Make sure that the battery is charged by long-term
connection to the charger.
If it does not help, the battery may be worn or
damaged.
The device works very shortly after
charging and / or charging will end
shortly after being connected to the
charger.
The battery is worn out and needs to be replaced.
Contact the manufacturer.
The device is not detected from the
Android application.
1. Make sure the device has Bluetooth enabled;
2. Search for devices nearby, device RPT-5 should be
detected;
3. Connect to the device using the 7785 pin.
The device does not detect or
incorrectly detect the sensor output
when the ignition is turned on.
Check the measurement cables. Try switching on the
ignition before selecting Sensor test . Diagnose the
sensor's power supply.
The sensor readings are
significantly different from those
read from the diagnostic tester.
An incorrect variant or range of the sensor has been
provided.
If the list of suggested solutions is exhausted or if a problem not mentioned in the table above
appears, please contact the manufacturer of the device.
Warning !!!
The device is covered by a 24-month warranty. Detailed conditions of the warranty are
in the warranty card included.
DeltaTech Electronics company has made great effort to write this manual to the best of
its ability, but it cannot guarantee that it does not contain any mistakes. While
© DeltaTech Electronics 2024 Ver.2.1
To Next Page
Loading...