POWER FAILURE
To disengage / engage
Pull manual release lever downwards. (Refer fig 10 below)
Figure 10
Technical Specifications
INPUT VOLTAGE: 220VAC+-10% 50 Hz
(110VAC 60Hz or 127VAC 60Hz available on request)
Single Phase
TRANSFORMER SPEC: Primary Voltage 220VAC +/-10%
Secondary Voltage 24 VAC
WORKING CIRCUMSTANCE: TEMPERATURE: -20 C – 70 C
RELATIVE HUMIDITY: <90%
MOTOR SPEC: Motor Type Permanent Magnet D.C. Motor
Voltage 24V DC
CONTROL BOARD SPEC: Control Board Voltage 24V DC / 5V DC
Light Glove Voltage 36V 1.5W
Receiver specification Receiver type FSK AM
(Built in) RF Frequency 433MHz/315MHz
Control distance 50m max.
TRANSMITTER SPEC: Carrier Frequency 433 MHz / 315 MHz
Current Consumption 50 mA (approx)
Battery Voltage 12 Volts A23 battery
Coding Format Rolling Code
(7.38x10 Code Combinations)
ACCESSORY OPTIONS
Additional remote control transmitter
Infrared beam Additional safety feature
Manual release lock
External receiver.