Need help?Do you have a question about the DTS 1000 and is the answer not in the manual?
Details the process for installing the opener on an aluminum track system.
Details the process for installing the opener on a one-piece steel track system.
Provides crucial advice and safety considerations for a successful installation.
This document outlines the installation and operational procedures for the DTS Garage Door Opener, a device designed for the automated opening and closing of tilt-up and sectional garage doors in private residences. The opener is engineered with user-friendliness in mind, featuring straightforward installation and setup processes.
The DTS Garage Door Opener incorporates several advanced functionalities to ensure safe, reliable, and convenient operation. A key feature is its "soft start, soft stop" mechanism, which minimizes the initial load on both the opener and the garage door during activation and deactivation. This gentle operation contributes to the longevity of the system.
Safety is paramount, and the opener includes robust obstruction detection capabilities. During the opening cycle, if the door encounters an obstruction, it will immediately stop. When closing, upon contact with an obstruction, the door will reverse at least 300mm, preventing potential damage or injury. This is complemented by dynamic self-learning for opening and closing force, allowing the opener to adapt to changes in door resistance, such as those caused by seasonal variations, ensuring consistent performance.
Overloading force detection further enhances safety; if the door experiences an overload during closing, it will automatically reverse more than 150mm. If an overload occurs during opening, the door will stop. The system also features low-voltage protection, which prevents any opening or closing actions when the voltage is too low, safeguarding the door panel and controller from damage.
For enhanced security, the opener utilizes a rolling code transmitter system. This technology generates billions of unique codes, virtually eliminating the risk of coincident or pirated codes, thereby preventing unauthorized access.
Additional features include an auto-close function, which can be configured to automatically close the door after a set period once it has been fully opened. A backup battery interface is available, ensuring continued operation during power failures. The opener also provides interfaces for a wall switch and photo beams. When photo beams are connected and active, the door will automatically change to an open state if an obstruction is detected while closing, further increasing safety.
Optional special functions expand the opener's capabilities. A flash light function provides a visual safety indicator during opening and closing, with interfaces for both DC and AC flash lights. The "Pass door (SD) protection" feature ensures that the garage door cannot be opened if a smaller pass door within it is not securely closed, preventing damage to the door panel. A "Holiday lock out" function offers an additional layer of security, allowing the user to restrict normal operation, with only a specific transmitter button sequence able to open the door during this mode.
The DTS Garage Door Opener is designed for ease of use, from initial setup to daily operation. The installation process is guided by clear instructions, emphasizing the importance of a solid and balanced door structure free from friction points. The chain shuttle assembly is often pre-assembled in the track for convenience, and lubrication of the chain and sprocket is recommended for smooth operation.
Setting up the opener's basic functions is intuitive. The limit setting for opening and closing, as well as the dynamic force learning, is achieved through a sequence of button presses on the control panel, guided by an LED display. Users can fine-tune the open and close limits and then allow the system to automatically learn the optimal opening and closing forces.
Matching transmitters (remote controls) to the receiver is a simple process involving pressing a button on the control panel and then on the desired transmitter. The system supports up to 20 transmitters. For security purposes, there is also a master erase function to delete all programmed transmitters.
Safety reverse force adjustment allows users to set the sensitivity of the obstruction detection, with levels ranging from 1 to 9. It is crucial to ensure photo beams are connected and working correctly, especially when selecting higher force levels. The auto-close function can be easily activated and configured for a specific delay time, from 1 to 9 minutes, or deactivated entirely.
The opener also provides a terminal for connecting a push button, offering an alternative control point inside the garage for opening, stopping, or closing the door, which is particularly useful for maintenance or if the transmitter is lost.
For the optional holiday lock out feature, activation and deactivation are controlled via the SET button and UP/DOWN buttons on the control panel. When active, the opener allows one opening and closing cycle before entering the lock-out state, requiring a specific transmitter sequence for subsequent operations.
While the logic circuit board of the DTS Garage Door Opener generally requires no specific maintenance, regular checks of the overall door system are crucial for ensuring continued safe and efficient operation. It is recommended to inspect the garage door at least twice a year to confirm it is properly balanced and that all working parts are in good condition. This includes checking cables, springs, and connections to the wall. Any signs of damage or imbalance should be addressed by authorized service personnel, as attempting repairs on components under extreme pressure can be hazardous.
The reversing sensitivity, a critical safety feature, should also be checked at least twice a year and adjusted if necessary. This ensures that the door continues to detect obstructions effectively. Furthermore, all safety devices, such as photo beams, must be regularly checked to confirm they are functioning correctly.
The manual emphasizes the importance of disconnecting the drive from its power source during any cleaning, maintenance, or part replacement procedures to prevent accidents. Users are advised against attempting to repair malfunctions themselves and should instead contact an authorized installer.
The manual also highlights the importance of informing the owner about the need for regular and accurate maintenance, particularly concerning the safety and reversing devices. A maintenance register kept by the user is recommended for tracking all services, repairs, or checks performed by professionally qualified persons. This proactive approach to maintenance ensures the long-term reliability and safety of the garage door opener system.
General| Type | Residential Garage Door Opener |
|---|---|
| Horsepower | 1/2 HP |
| Drive Type | Chain Drive |
| Voltage | 120V |
| Speed | 7 inches per second |
| Remote Control | Yes |
| Safety Features | Safety Sensors |
| Warranty | 1 year limited |
To Next Page
