DTS 1000 User Manual

Standard packing list
Item
Quantity
Door opener
1
1
2
1
1
2
1
2
1
1
1
1
1
1
Track (incl. Traveller)
Transmitter
Door bracket
Wall bracket
“U” bracket A
“U” bracket B(If aluminum track)
Iron angle A
Track bracket
Clutch cord
Cord pendant
Straight arm
Bent arm
Fixing kit
General error code
Code Failure
Possible causes
Proposed solutions
No signal
Check & fix connection between
Main hall sensor and PCB A.
E1
E2
E3
E4
Detected on main Main hall sensor loose
hall sensor
No signal
-Check & fix connection between
sub hall sensor and PCB A.
-Power off and restart the device
Swap main hall sensor and sub hall
Sensor wire on PCB A, learn travel
Limit again.
Detected on sub
hall sensor
Sub hall count
faster than main
hall
Sub hall sensor loose
Main hall sensor and
sub hall sensor wire
switched
Wicket door
terminal open
circuit
-Wicket door is open
-Wicket door
-Close the wicket door
-Fasten the wicket door connecting
Connecting wire is loose.
-Incorrect type motor is
-Replace with a correct type motor
E5
E6
Motor not
working
used
-Replace with a new motor
-Motor is damaged
-There's object under
The door
-Move away object under the door
-Adjust door installation & reset
travel limit
Door blocked
During closing
-Stuck between door
15

DTS 1000 Specifications

General

Brand	DTS
Model	1000
Category	Garage Door Opener
Language	English