8.3- Movement
Unlimited Pan rotation; Tilt 270° (1,5 sec.) .
Do not place any obstructions in the path of the projector's movement.
WARNING
Do not place any object in the
path of the projector’s
movement
Free Pan Rotation (‘FPR’)
8.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place.
It is permissible to place the unit on normally flammable surfaces. Suitable for
mounting on normally flammable materials surfaces greater than 200°C with
some combustion time lag.
Minimum distance from the closest illuminable surface: 0,5 m.
8.5- Forced ventilation
You will note, on inspection, that the unit features various air inlets and cooling fans
located on both the base and head of the fixture.
These should, under no circumstances, be blocked or obstructed whilst the projector
is in operation. Doing so could cause the fixture to seriously overheat thereby
compromising its proper operation.
8.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow.
The ambient temperature should NOT exceed 40°C.
To Next Page
Loading...
Need help?
General
