9- MAINS CONNECTION
WONDER with electronic ballast operates at 90-260V 50-60 Hz.
Prior to connecting the unit to your mains supply, ensure that the model in your
possession correctly matches the mains supply available.
For connection purposes, ensure that your plug is capable of supporting 4 amps
at 230 VOLT, or 10 amps at 90 VOLT each unit connected.
Strict adherence to regulatory norms is strongly recommended.
MAINS AC OUTPUT 90-260V 50/60 Hz (16A Max)
Max 4 WONDER Units @ 230V
Max 2 WONDER Units @ 120V
MAINS AC INPUT 90-260V 50/60 Hz
FUSE 10A T
9.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each WONDER.
It is, moreover, recommended to protect the supply lines of the projectors by using
Appropriately sized residual current devices.
Connection must be made to a power supply system fitted with efficient earthing
(Class I appliance). A good earth connection is essential for the correct operation
of the projector.
To Next Page
Loading...
Need help?
General
