IF CHANNEL 32 ZOOM MODE = INDEPENDENT ZOOM CONTROL (DMX range value 000-127)
ZOOM CENTRE Linear control from narrow to wide (3,5° - 52°)
IF CHANNEL 32 ZOOM MODE = GLOBAL ZOOM CONTROL (DMX range value 128-255)
GLOBAL ZOOM (Zoom centre + Zoom sectors) Linear control from narrow to wide
(8° - 52°)
IF CHANNEL 32 ZOOM MODE = INDEPENDENT ZOOM CONTROL (DMX range value 000-127)
ZOOM SECTORS Linear control from narrow to wide (8° - 52°)
IF CHANNEL 32 ZOOM MODE = GLOBAL ZOOM CONTROL (DMX range value 128-255)
Independent Zoom control: Zoom centre ch30 and Zoom sectors ch31 enabled
Global Zoom control on ch30 enabled; Zoom sectors ch31 disabled
To activate following functions, stop in DMX value for at least 5 seconds.
FUNCTION channel ch29 must be at range 161-255.
WHITE PRE-PROGRAMMED channel ch25 must be at range 000-055.
Corresponding DISPLAY MENU settings, will be overwritten.
GAMMA CORRECTION QUADRATIC
Fans Speed Studio Mode (not yet implemented)
Fans Speed Live Mode (not yet implemented)
ZOOM CENTRE + ZOOM SECTORS reset