Dual 502 - Lubrication Recommendations

Lubrication
Renotac
No. 342
adhesive oil
All bearing
and friction points
of the unit
are
adequately lubricated at the works.
Re—
plenishment
of oil and grease is
only neces—
sary after approximately 2
years of normal
use of the record
player as the most impor—
tant bearing points (motor bearings)
haue
sintered metal
bushes.
Bearing
points and friction faces should be
lubricated sparingly rather than generously.
lt
is important that no oil grease should
come in contact with the friction faces
of
the Fiat belt, drive pulley and flywheel ro—
tor, otherwise slip will occur.
When using different
lubricants, chemical
decomposition can often take
place. To pre—
vent lubrication
failure we recommend using
the original
lubricants stated below.
Fig. 16
Dual 502
13
220-2400- 5010
‚0w,0
ql,i) A
e
BP Super
Viscostatic 10
W/30
Shell
Alvania No.
2
Isoflex POP
40
Silicone oil AK 500
000
920 360-2
5/1176
Printed in
Germany by
Dual