Need help?Do you have a question about the Dual 502 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Platter | Non-magnetic, dynamically balanced |
| Platter weight | 1.0 kg |
| Platter diameter | 300 mm |
| Cueing | Yes |
| Tonearm Type | Static Balanced S-Shaped Tonearm |
Instructions for replacing the motor pulley on the turntable.
Procedure for setting and adjusting the correct turntable speed.
Steps to remove the tonearm from its bearing frame.
Detailed steps for removing the entire tonearm assembly.
Instructions for replacing the tonearm spring housing.
Adjusting horizontal and vertical tonearm bearing play.
Setting the anti-skating force using the pointer disk.
Explains operation and stylus height adjustment of the cue control.
Step-by-step instructions for replacing the cue control assembly.
How the tonearm shut-off is triggered by the platter dog.
Adjustments for segment and shut-off point timing.
Addresses platter not running or reaching speed issues.
Solutions for pick-up head alignment, stylus slip, and lowering.
How to resolve issues causing acoustic feedback.
To Next Page
