Need help?Do you have a question about the Dual 621 and is the answer not in the manual?
General| Drive System | Direct Drive |
|---|---|
| Speed | 33 1/3 and 45 RPM |
| Effective Length | 222 mm |
| Platter Diameter | 300 mm |
| Platter | non-magnetic |
| Automatic Operation | Fully automatic |
| Tracking Force | 1.5 g |
Procedures for removing and replacing motor electronics and mechanics.
How to adjust nominal speeds, set 78 rpm, and use the pitch control.
Using the stroboscope to accurately check platter speeds.
Details on tonearm suspension, friction, and steps for its removal.
Replacing spring housing and adjusting tonearm bearings.
Covers continuous play, automatic start, and manual start functions.
Operation of stopping, shut-off, and muting switch functions.
Adjusting the automatic set-down position of the tonearm.
Adjusting tonearm vertical lift, power switch, and tonearm head alignment.
Diagnosing and fixing speed, stylus, tonearm, motor, and acoustic issues.
Specifications for various electronic components used in the turntable.
To Next Page
