Need help?Do you have a question about the Dual 601 and is the answer not in the manual?
Step-by-step guide for removing and installing a new motor pulley.
Instructions for adjusting the vertical and horizontal tonearm bearings for proper play.
Details how to gently set down the tonearm at any desired point on the record.
Describes how to initiate operation by manually moving the tonearm.
Explains the function of the short circuiter to prevent noise during automatic operation.
Details how to operate the unit for continuous automatic record playback.
Explains the automatic shut-off function and its initiation after record playback.
Step-by-step guide for removing and installing a new motor pulley.
Instructions for adjusting the vertical and horizontal tonearm bearings for proper play.
Details how to gently set down the tonearm at any desired point on the record.
Describes how to initiate operation by manually moving the tonearm.
Explains the function of the short circuiter to prevent noise during automatic operation.
Details how to operate the unit for continuous automatic record playback.
Explains the automatic shut-off function and its initiation after record playback.
General| Drive System | Belt drive |
|---|---|
| Speeds | 33 1/3, 45 rpm |
| Anti-skating | Adjustable |
| Overhang | 19.5 mm |
| Tonearm | Static balanced, tubular aluminum |
| Wow and Flutter | 0.05% |
| Cartridge weight range | 5 to 10 grams |
To Next Page
