Dual ALB10 User Manual

2
Getting Started
Thank you for purchasing the Dual ALB10 10" ported enclosure with built-in
amplifier. Although Dual has attempted to ensure the information in this manual
is accurate, please be aware that any part of it is subject to change without notice.
Please read entire manual before installation. Due to the technical nature of
amplifiers, it is highly recommended that your Dual ALB10 is installed by a
professional installer or an authorized dealer.
Before You Start
•Alwaysdisconnectthenegativebatteryterminal.Consultaqualifiedtechnician
for instructions if you are unsure.
•Avoidinstallingtheamplifierwhereitwouldbesubjecttohightemperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessivevibration.
•Useextremecautionwhendrillingholestoavoiddamagingfuellinesor
existingvehiclewiring.
•Allamplifierinstallationsrequirepower,signalandspeakerwires(not
included).
•Anamplifierinstallationkit(soldseparately)ishighlyrecommendedto
facilitatetheinstallation.Consultyourdealerforrecommendations.
Mounting Location
•ChooseamountinglocationfortheALB10.Suggestedlocationsincludebehind
a seat or in the trunk.
•Foroptimumperformance,makesuretoprovideatleast1"ofspacearoundall
sides of the amplifier.
•DonotmounttheALB10undercarpetsorwhereairflowisrestricted.
•DonotinstalltheALB10whereitmaybeexposedtomoisture.
•Theoptimummountinglocationvariesbetweenvehicles.Remembertotestall
amplifier functions before completing the final mounting procedure.
PREPARATION

Dual ALB10 Specifications

General

Brand	Dual
Model	ALB10
Category	Enclosure
Language	English