Dual ALB10 User Manual

3
The following installation instructions are intended to be used as a basic
guideline. If you feel unsure about installing this speaker system yourself, Dual
recommendsacquiringtheservicesofaprofessionalcaraudioinstallation
center.
Beforeinstallation,pleasereviewthefollowingguidelines:
1. Be sure to carefully read and understand the instructions before attempting to
install this product.
2.Ifadditionalwiringisrequired,werecommendrunningallwirespriorto
mounting your enclosure in place.
3. To ensure reliable performance and minimize signal or power loss, use the
highestqualityconnectorsavailable.
4.Neverrunspeakerwiresunderneathyourvehicle.Runningspeakerwires
insidethevehicleprovidesthebestprotectionfromexhaust,heatand
environmentalelements.
5.Avoidrunningwiresover,nearorthroughsharp-edgedsurfaces.Wesuggest
you also use rubber grommets to protect any wires routed through metal,
especially the firewall.
6.Whenrunningthespeakercabletotheamplier,avoidrunningitnearsources
ofhighcurrent(i.e.wiringharnesses,batterycables).
Safety First
The following instructions are designed to ensure safety during installation and
use of the ALB10. Failure to heed these instructions can result in injury or damage
to the unit or vehicle.
CA
UTION
!
INSTALLATION

Dual ALB10 Specifications

General

Brand	Dual
Model	ALB10
Category	Enclosure
Language	English