Need help?Do you have a question about the Dual DT250 and is the answer not in the manual?
General| Drive type | Belt Drive |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Tonearm Length | 221.5 mm |
| Overhang | 19 mm |
| Tracking Force Adjustment | 0-4 g |
| Tonearm | Static balanced |
| Platter | Aluminum |
| Output | RCA |
| Power Supply | 50/60Hz |
Step-by-step guide for assembling the turntable.
Instructions for connecting the headshell to the tonearm.
Steps for mounting and adjusting the tonearm counterweight.
How to connect the DT250 to your receiver or amplifier.
Instructions for connecting the turntable to AC power.
Procedure for balancing the tonearm and setting needle pressure.
Guidance on adjusting the anti-skating force.
Simple steps for playing records on the turntable.
Steps for removing and installing a new stylus.
To Next Page
