How to fix a Dual Car Stereo System that will not turn on?
If your Dual Car Stereo System won't turn on, check the following: * Ensure the yellow wire is correctly connected and has the proper voltage (11~16VDC). * Verify the black wire is properly connected to ground. * Inspect the fuse and replace it if it's blown.
Why does my Dual Car Stereo System keep blowing fuses?
If your Dual Car Stereo System keeps blowing fuses, the issue might be: * A yellow or red wire touching the chassis ground: inspect for any pinched wires. * Speaker wires touching the chassis ground: check for pinched wires. * An incorrect fuse rating: replace the fuse with one that has the correct rating.
What to do if my Dual Car Stereo System has power but no sound?
If your Dual Car Stereo System has power but no sound, try these steps: * Check the speaker wire connections at the speakers. * Make sure that bare speaker wires are insulated from each other and the chassis ground.
Why is my Dual Car Stereo System skipping a lot?
If your Dual Car Stereo System is skipping excessively, the possible causes are: * The unit is not mounted correctly, or the backstrap is not secure: verify the mounting sleeve and backstrap support. * There is a physical defect in the media (CD, CD-R, or CD-RW): examine the media for scratches.
What to do if my Dual Car Stereo System won't accept a disc?
If your Dual Car Stereo System won't accept a disc: * The CD mechanism position might be out of alignment: press EJECT for 3 seconds to reset the CD mechanism position. * CD transit screws might still be in place: remove the 2 transit screws located on top of the unit.
What does ERROR-01 mean on my Dual Car Stereo System?
If ERROR-01 appears on the display of your Dual Car Stereo System, it indicates a disc read error. Try pressing the eject button or the RESET button.
What does ERROR-02 mean on Dual Car Stereo System display?
If ERROR-02 appears on the display of your Dual Car Stereo System, it means focus error or the disc is inserted upside down. Press eject or RESET.
What does ERROR-03 mean on my Dual Car Stereo System display?
If ERROR-03 appears on the display of your Dual Car Stereo System, it indicates a FAT error. Press eject or RESET.
What does ERROR-04 mean on the Dual Car Stereo System display?
If ERROR-04 appears on the display of your Dual Car Stereo System, it means MP3/WMA decode error. Try pressing the eject button or the RESET button.
Why does 'PROTECT' appear on my Dual Car Stereo System display?
If 'PROTECT' appears on the display of your Dual Car Stereo System, the WMA file is copy-protected by DRM (Digital Rights Management). Write the disc using WMA files that are not copy-protected.
General| Display Type | LCD |
|---|---|
| DIN Size | Single DIN |
| Bluetooth | Yes |
| USB Port | Yes |
| Radio Tuner | AM/FM |
| SD Card Slot | Yes |
| Auxiliary Input | Yes |
| Subwoofer Output | Yes |
| Steering Wheel Control Compatible | Yes |
| Rear View Camera Input | Yes |
| Compatible Audio Formats | MP3, WMA |
| Remote Control | Yes |
| RMS Power Output | 22 Watts x 4 |
| Power Output | 50 Watts x 4 |
To Next Page
