EasyManua.ls Logo

DUALSUN FLASH - General Safety Instructions for Installation

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. General description
2.1. Technical characteristics
The technical characteristics of the DualSun panels can be found in the technical sheets published in our -
online library
2.2. General recommendations
2.2.1. Handling
DualSun modules should be handled like any glass product. To avoid accidents, injuries, or damage to the
module during work, the following precautions must always be observed:
Do not step on the modules.
Do not drop anything on the modules.
Protect the modules from possible scratches on the front and rear sides
Do not exert mechanical tension on the connectors.
Always lift and transport the modules with both hands and never use the junction box as a carrying handle.
For the complete deconditioning and handling procedure for DualSun modules, see DualSun sheet No. 04-78.
2.2.2. Transport
In order not to risk damaging the modules during transport, the following instructions must be observed:
Transport the stacked modules vertically, with a separator supported by the frame of each module.
Do not remove the original packaging until the time of installation.
Do not apply mechanical pressure to the modules (for example, do not fasten the modules with a strap, or
else do not place any object on the surface of the modules).
2.2.3. Storage
During storage, to avoid any accident or damage to the modules, the following instructions must be observed:
Store the modules vertically.
Do not store modules on the edges, on a corner, or on an uneven surface.
Do not place any object on the surface of the modules.
When choosing a suitable storage location, make sure that:
The location is dry and cool,
No object can fall on the module and thus damage it.
WARNING
If a DualSun module is damaged or broken, it must be replaced. Never install a damaged mod-
ule.
2.3. Technical considerations
Throughout the year, the system is exposed to external weather and natural conditions (sun, wind, rain, hail,
snow, thunderstorms, dead leaves, dust, bird droppings, etc.) which influence the performance and service life
Installation, use, maintenance manual DualSun FLASH
5

Other manuals for DUALSUN FLASH