Installation, use and maintenance instructions - DualSun FLASH
7 Responsibilities
DualSun products are produced
in compliance with the
requirements of the various
applicable European directives.
Installation and first commissioning
must be carried out in accordance with
the rules of the art in conformity with:
•
the instructions in the installation
manual,
•
the legislation and standards in
force.
The installer must inform the user of the
need for regular maintenance.
The user must employ qualified
professionals:
•
to carry out the installation
and to carry out the first
commissioning,
•
to carry out the regular
maintenance of the
installation.
The user must keep the installation-
related documents close to the
system components.
7.1 Warranty conditions
See the document "DualSun – Contractual warranty" for DualSun products.
For the other components of the installation, see the warranty conditions of the different manufacturers.
7.2 Disclaimer
DualSun's liability cannot be incurred in the following cases:
• Failure to comply with the instructions contained in the notice concerning installation, use, operation and
maintenance of the installation.
• Failure to comply with the safety rules set out in the recommendation published by the national risk
prevention body
To Next Page
Loading...
